PSH-DP3 Multi-Layer Lift-Sliding Mechanical Type Car Parking system

1.Security 2.Each car sets have four positioning pin 3.without parked in the middle 4.Increase bearing strength

 

Product Information

 

 This vehicle storage system utilizes the movements of the platform’s lifting and sliding which driven by electric wire ropes to complete the Robot-Retrieving performance. Multi-Layer Lift-Sliding Mechanical Type is famous for speeding and safety, equipped with perfect security appliances, control systems and simple structure, and it is characterized by standardized design, large-scale production, fast installation and operating smoothly.

 

 The Entry/Exit of this system is built on the first ground. Top layer’s pallet is used for lifting and the lowest layer’s pallet for sliding. The middle layers can do both lifting and sliding movements. Each middle layer has empty parking spaces for pallet changing the parking space by sliding, and the lowest layer retrieves the vehicle without movement.

 

 

application

 

1 Indoor and outdoor all can install, general mostly installed in outdoor

2 Suitable for original parking space transformation, heightening the multilayer parking.

3 Garage a driveway width before six meters.

4  Must be equipped with the roof, and side behind the canopy, packing.

 

 

System Features Introduction

1 This system is mainly used connected chains to complete lifting, usually built for 3-6 layers.

2 Compared with the similar systems, it makes full use of underground space and this system is better for outside.

3 Utilizelarge span design to improve the utilization of land, easy to operate (PLC),energy saving and  environmental friendly

4T his equipment Generally installed on the ground in outdoor and can design for 3 ~ 7 layers on the ground;

5 Vehicle from the ground layer pass in and out, the ground layer interval a parking Spaces for a entrances and exits, inward and outward position set a lift, each parking can cross moved to lift position, the elevator will vehicle to the ground layer;

6 ach group control area leave a lifting channel, each group control area general design 30 ~ 60 parking Spaces

7 Each group control area design a set of electric control boxand an operating box,and the demand power of each group of control box is 3 box, 5 line 380 v10kw

8 operator as long as to depress a number in the operationalbox, the equipment will move the lot to the ground to In and out of the car

9 The advantages of This equipment are effective use of space, in the original parking place can transform to be stereoscopic, simple structure,and convenient operation

Parking Planning

Each control region of the group can be designed between three-connected and six-connected and the plan can be constituted and designed flexibly as well.

System Security

Utilize four-point anti-fall device with independent stop block; overrun distance, speeding and overtime detector to ensure that the vehicles are accessed security. In addition, the system is equipped with inspection device for detect wire ropes’ tightness and length.

Main Technology Dimensions
No.	Content		Introduction
1	Parking floor		upper	middle	lower
2	Parking Specifications	length(mm)	≤5000	≤5000	≤5200
		width(mm)	≤1850	≤1850	≤1900
		height(mm)	≤1550	≤1550	≤2050
3	Testing load(kg)		≤1700	≤1700	≤2000
4	Lifting	power(kw)	2.2
		speed(m/min)	5.5-6
5	Sliding	power(kw)	0.2
		speed(m/min)	8
6	Drive Mode		Motor + Chain + Wire rope
7	Operation		Push Button ,Automatic ,Manual
8	Power		AC 380V/220V 50Hz 3ph 380V 220V 50Hz

PSH-DP3 Multi-Layer Lift-Sliding Mechanical Type Car Parking system